Maintain the cleanliness of your aquarium by using a reliable aquarium heater. A quality aquarium heater is simple to use, reliable and accurate.
They should be placed close to filters or circulation pumps for better distribution of their warmth. To prevent them from burning out, they must be kept clear of other sources of heat, such as lamps or hot décor.
Types
The proper temperature of water is vital for fish. Every tropical fish species, except for certain species that require cold water, need warmer water in order to flourish. If you do not keep the proper temperature of your water your fish will be afflicted by stress, illness or even death.
Aquarium heaters are a vital piece of equipment to ensure the wellbeing of your pets in the water. Electric heaters are available in different sizes and are able to heat water with electricity. They are either hang-on or submersible and both can be adjusted to reach your desired tank water temperature. When choosing the right aquarium heater make sure to select a model that is fully submersible, as this will not pose any risk of electrical leakage and it will also ensure that the heat is evenly distributed across the tank.
Hang-on aquarium heaters are placed on the wall behind the tank and are usually placed a few inches from the bottom. They are typically placed near the filter outlet or inlet. They circulate heated water back into the tank. This kind of heater for aquariums is usually more affordable than a submersible aquarium heater however it might not distribute heat as efficiently. It is crucial to monitor your aquarium and use a thermometer to verify that the heater for your aquarium is doing its job.
Submersible
Unlike rim-mount heaters, submersible aquarium heaters are enclosed. They are more durable and available in different sizes to fit any tank. Some even include a digital thermometer for double-checking the accuracy of the setting. They also guard against water, and their seals, both external and internal, provide excellent leak protection. They require between 5 and 10 Watts of electricity, based on the size of the tank.
A very popular choice for tank owners, this heater is easy to set up and works well with small tanks. Its flat design permits it to be set in tight spaces. It also comes with an easy-to-use control system as well as overheat protection. It’s also made from durable plastic, which is resistant to breaking or cracking.
Be sure to unplug the tank heater before changing the water. Electrical shocks could cause fatal injuries if you do not unplug the heater in the tank. The best way to avoid this is to connect an electronic device that detects when the tank is being draining, and then notify the person immediately so that they can turn off the power to the heater before it shuts off on its own.
This heater is designed to keep your aquarium at an even temperature of 78°. Its electronic thermostat helps prevent overheating and extends the life of the heater. It features silicon carbide crystals which improve heat transfer and distribution in addition to the strength of a glass tube that’s heat- and shock-resistant. Suction cups make it easy to fix the tank’s walls.
Find out the Wattage of a heater
The function of a heater is to channel energy emitted by power lines to heating coils, which convert this energy into heat thereby raising the water temperature. The greater the power of the heater, the higher energy it will be able to give per unit volume of aquarium water.
It takes approximately 1 watt to increase the temperature of one gallon of water by one degree. To determine how much the wattage that your tank requires, subtract your room temperature from the desired temperature for your aquarium and divide that number by your tank size. If you have a 10 gallon aquarium in a space that’s 70 degrees, then 3 watts per day will be needed to increase the temperature of your aquarium by 5 degrees.
When shopping for a heater, it is recommended to look for a model that will offer a wattage range of 5 watts per gallon or higher. You can easily adjust the temperature in your aquarium.
Consider that the other electrical devices in the aquarium can also contribute to the amount of watts required to maintain a specific temperature. A sump pump that is submerged at fifty watts for instance, is the equivalent of running a 20-watt heater seven all week. A circulation powerhead adds five to ten watts in heater energy per day.
Adjustable
A number of heaters are required to keep the water at the ideal temperature for a large tank. A variable aquarium heater permits you to fine-tune the wattage of heating to fit your tank’s dimensions as well as the requirements of the fish living within the tank.
The aquarium heater can be placed inside the tank at the bottom, to keep away from any clutter or be affixed to the filter of the thiet ke be ca canh bien tank. Choose a heater that comes with an independent thermometer to monitor its performance. This can ensure that the temperature in your aquarium is steady and prevents overheating.
Another important thing to remember is that placing too many heaters in small tanks can cause them to turn on and off frequently. This can result in the heaters beginning to wear out or even fry the fish. It’s best to install a separate thermostat that will turn off the heaters in the event that the temperature is higher than the predetermined level.
Most aquarium heaters have safety features that prevent overheating. Certain aquarium heaters come with an indicator that flashes in the event that the heater is switched on or off. They also have an electrical fuse that shuts off electricity after a set duration, thus preventing damage to the unit. Certain heaters come with an integrated thermometer. It is best to connect the aquarium heater to an outlet in a warm room. This will lower its pressure and prolong its life.